机械工程师Mechanical engineer

岗位职责：

Responsibilities:

1.     根据 MAK 和客户标准，完成项目机械设计概念图，3D和2D设计图。

Make Projects Mechanical Design, concepts, 3D and 2D; according to MAK and Customer standards.

2.     向项目经理报告机械设计进度（后续跟进表）

Report progress of mechanical design to PM (Follow-up Sheet)

3.     完成并更新机械的使用指南，以及项目上所有必需的信息。

Complete and update Mechanical Guideline for Project with all required information.

4.     需要时制作非标设备规格标准。

Make Special Equipment Specifications when needed.

5.     定义项目上相关机械，气动和传感器材料清单（BOM）并在系统中输入;在设备装配和安装过程中添加所需的材料和校正。

Define Project mechanical, pneumatic and sensor Material List (BOM) and input in the system; add required material and corrections during assembly and set up of equipment.

6.     与电气部门合作，为电缆布线设计最佳解决方案。

Work together with Electrical department to define the best solution for the cable routing.

7.     与电气工程师一起制作设备的I / O图表。

Make equipment I/O chart together with Electric Engineers.

8.     制作设备的气动设计和原理图。

Make pneumatic design and schematics.

9.     为设备制作装配图。

Make assembly drawings for the equipment.

10.  在机器设备组装开始之前，完成装配说明书，其中包含所有相关的机械文档（装配图、I/O、清单等）。

Complete Assembly Notebook with all related mechanical documents before machine assembly starts. (Assembly drawings, I/O, Checklist, etc.…)

11.  配合电气编程工程师解决装配问题，以保证机器运行及效率。

Coordinate with Electric-Programing Engineers to solve assembly problems and to ensure machine operation and efficiency.

12.  支持车间、客户现场的装配工作，修复优化所有机械设计，气动，BOM和其他文档。

Support assembly operations in workshop and customer site; fix all mechanical design, pneumatics, BOM and rest of documents.

13.  在设备装配期间更新完成所有设计的修改（绘图、I/O 图等）。

Update all modifications (drawing, I/O map, etc...) done during assembly and set up.

14.  为客户制作设备的机械文档（图纸，手册等）。

Make equipment mechanical documentation for customer (Drawings, Manuals, etc...)

15.  保持办公室和车间的安全，整洁。

Keep safety, clean and organized the office and workshop.

16.  必要时前往客户现场出差。

Travel to customer site when necessary.